SPC (22) clamping disc
Description
Standard V-belt pulleys can have several fastening methods. The advantage of the tapered clamp (Taper Bush) version is that it does not require subsequent metalworking. For the desired mount, you need to choose a tapered clamp whose shaft size meets our expectations and can be installed in the drive. The disadvantage is that oversized holes cannot be used, i.e. for "small disc - large shaft" tasks you will not be able to find a suitable product.
SPC pulleys can be used for belts marked C. (22mm wide profile belts: C, SPC, XPC) Part number of the discs: SPC nominal diameter / number of tracks - type number of the tapered clamping that can be matched. The maximum diameter (Do) of pulleys marked SPC shall be at least 9,6 mm larger than the nominal diameter (measured at the location of the force carrier). SPC discs shall have a minimum track depth of not less than 19 mm calculated from the nominal diameter (Dp) measured at the point of the support fibre. In the case of Sati**** branded products, the delivered product is not always Sati branded, but in some cases Optibelt, Concar or other branded products, but completely identical in design to Sati.