17x11 ( B ) clad classic V-belt
Description
The rubber core of the V-belt is coated with fabric. Characteristically it has a black color. The mark of the size B strap comes from the ISO marking of the product. All straps about 17 mm wide have this letter in their marking. However, if the letter B stands alone, it always stands for classic clad V-belt with a profile width of 17mm and a profile height of 11mm. The Size fields show the nominal millimeter size of the strap and the calculated inch size. The Description field indicates the nominal internal size, the nominal force carrier size and the nominal inch size. This value is the value of the same belt length measured at different locations and is for information/comparison.
The size printed on the product is the internal size (Li). This is true even if the Li marking has not been printed on the size data. If you don't want to change the size from another belt, you don't plan a new drive, pay attention only to the Li size!
The 17x11 mm profile belt can be used for a V-pulley marked SPB. From a technical point of view, it has an average range of applications, but it is a reliable and inexpensive solution for belt drives.
TIP! The PIX X'Set V-belts are very affordable and have excellent quality.
Attention! Classic V-belts with a profile of 17x11 are recommended for industrial use. They are not ideal for pulsating, pulse-like use! We do not recommend them as mower tractor clutch belts (knife drive belts). For this purpose, use a dry-coated V-belt