10x8 (XPZ MUSCLE) reinforced toothed narrow profile V-belt
Description
The XPZ V-belt is the ZX toothed V-belt with increased profile height (8mm height). Muscle is a heavy-duty, reinforced version of XPZ straps. Up to 40% more power and up to 98% efficiency can be achieved. It is suitable for maintenance-free tasks and can be used at outdoor temperatures of up to 130 degrees. At higher speeds and tasks with higher vibrations, its properties are more favourable than SPZ belts. Due to discrimination, some manufacturers have a nominal profile width of 9.7mm instead of 10. For simplicity, we list a section width of 10mm for each narrow profile ~10 strap.
The Size field displays the belt width, the nominal length of the belt in millimeters, and the nominal length in inches. The Description field displays the nominal length of the belt and its nominal external size. The typical size of the product is Lp (pitch swing), which is printed on a strap. (It can also be called Lw or Ld, but it means the same thing.) If you don't want to recalculate/design, change belt type and are looking for a narrow profile V-belt, pay attention only to the Lp size! If you want to replace a classic belt with a narrow profile strap, find the size of your old belt among the classic straps 10 and read the Ld size for the given strap from the table and choose a suitable narrow profile V-belt.
The XPZ profile belt can be used for a pulley marked SPZ. From a technical point of view, it is a strong solution for belt drives.