Profile HTD-8M timing belt
Description
HTD toothed belts are belts suitable for non-slip drive transmission (as in the case of chain drive), since not only frictional force, but also teeth hold the belt in position. They are made of rubber with fiberglass force-bearing thread. The PIX TorquePlus HTD-8M toothed belt has a fully standard design that adheres to the disc in a semicircular shape for maximum power transfer. Used specifically in HTD-8M discs. Optibelt Omega tooth design is slightly different from the standard HTD tooth design. due to this difference, the belt can be operated quieter and can be used in RPP pulleys in addition to HTD pulleys. The Megadyne RPP design also differs from standard HTD teeth, but the manufacturer guarantees perfect power transmission in HTD-8M and RPP8 discs.
HTD-8M toothed belt widths are available in mm. When ordering, it is necessary to specify how wide the strap should be. (Any width can be selected, standard widths are: 20mm, 30mm, 50mm, 85mm.) Price and quantity unit: 1 mm. This strap is individually cut from the sleeve made in the factory about 1 m wide when ordered. Since it is considered a custom production, we do not exchange or take it back, and we do not accept withdrawal from the customer after the start of production (sending the confirmation).
The supplied width of HTD8M belts may differ from the nominal width. The tolerance for belts with nominal widths of less than 30mm (regardless of length size) is +0.8mm and -0.8mm up to 840mm belt length. 840mm belt length from +0.8mm to -1.3mm. For belts with nominal sizes of 30-50mm, up to a length of 1680mm, +1.3mm and -1.3mm. For HTD8M belts with a nominal width of 30-50mm reaching or exceeding 1680mm, the width tolerance can be +1.3mm and -1.5mm. From 50mm nominal width to 840mm length size below +1.5mm and -1.5mm. From 840mm length upwards it can be +1.5mm and -2.0mm.
For the same use, you can find belts for different power levels in the table below. Megadyne RPP and PIX XAct are normal strength. Megadyne Silver and PIX Torque Plus are triple strength. Megadyne Gold has four times the strength. Megadyne Platinum has a strength of 5.8x.