Profile HTD-5M timing belt
Description
HTD toothed belts are belts suitable for non-slip drive transmission (as in the case of chain drive), since not only frictional force, but also teeth hold the belt in position. They are made of rubber with fiberglass force-bearing thread. The PIX TorquePlus HTD-5M toothed belt has a fully standard design that adheres to the disc in a semicircular shape for maximum power transfer. Used specifically in HTD-5M discs. Optibelt Omega tooth design is slightly different from the standard HTD tooth design. due to this difference, the belt can be operated quieter and can be used in RPP pulleys in addition to HTD pulleys. The Megadyne RPP design also differs from standard HTD teeth, but the manufacturer guarantees perfect power transmission in HTD-5M and RPP5 discs.
HTD-5M toothed belts are available in mm width. When ordering, it is necessary to specify how wide the strap should be. (Any width can be selected, standard widths are 9mm, 15mm, 25mm.) Price and quantity unit: 1 mm. This strap is individually cut from the sleeve made in the factory about 1 m wide when ordered. Since it is considered a custom production, we do not exchange or take it back, and we do not accept withdrawal from the customer after the start of production (sending the confirmation).
The supplied width of HTD5M belts may differ from the nominal width. The tolerance for belts with nominal widths narrower than 9mm (regardless of length size) is +0.4mm and -0.8mm. For belts with nominal sizes up to 840mm in length up to 9mm or wider, +0.8mm and -0.8mm. For HTD5M belts with a length of 840mm or more and a nominal width of 9mm or more, the width tolerance can be +0.8mm and -1.2mm.
For the same use, you can find belts for different power levels in the table below. Megadyne RPP and PIX XAct are normal strength. Megadyne Silver and PIX Torque Plus are triple strength.
TIP! PIX TorquePlus reinforced toothed belts are priced at a very affordable price point and are of excellent quality.