PU running meter Profile AT10 toothed belt
Description
AT flowing meter polyurethane toothed belts are made of thermoplastic polyurethane with a hardness of 92 ShA. The tooth profile complies with the ISO17396 standard. Their color is white by default. As standard, they do not have a coating either on the tooth side or on the back. They have a steel force carrier fiber coated with zinc. They come in 100m long rolls.
The standard dimensions of the AT10 flowing meter PU toothed belt are as follows: profile height 4.5mm, tooth spacing: 10mm, tooth height 2.5mm. AT10 running meter straps can be individually made in both NFT (tooth side coating) and NFB (back coating) designs. These versions can be produced in full rolls. (You don't have to buy a full roll if you see stock of coated products in the table below.)
AT10 running meter belts are individually cut to size. When ordering, it is necessary to select a product corresponding to the desired width, specify the desired length and number of pieces. The straps are always cut to the nearest size to the specified size, corresponding to the whole number of teeth.
AT10 PU toothed belts can be made in OPEN and INFINITY BAKED versions. The minimum length of the baked belts is 900mm. The tensile strength of the baked sak is half the tensile strength of the original belt! By default, we supply an OPEN strap. Please clearly mark it in the comment section of the order if you request the strap to be endlessly baked.
Custom cut. After confirming the order, we do not accept any withdrawal from the order, we do not exchange or take back the product!