Profile L inch toothed belt
Description
Classic inch toothed belts are belts suitable for non-slip drive transmission (as in the case of chain drive), since not only the friction force, but also teeth hold the belt in position. They are made of rubber with fiberglass force-bearing thread. Due to its American origin, it has an inch size division. (The inch size of the length is obtained by dividing the model number by 10.) The L straps have a pitch of 9,525 (3/8 inch) mm. The teeth of the L belts have a wedge angle of 40 degrees. The total profile height is 3.6mm.
The width of the L toothed belts is available in mm. When ordering, it is necessary to specify how wide the strap should be. (Any width can be selected, standard widths are: 12.7mm = dial code 050, 19.05mm = disc code 075, 25.4m = disc code 100) Price and quantity unit: 1 mm.
This strap is individually cut from the sleeve made in the factory about 1 m wide when ordered. Since it is considered a custom production, we do not exchange or take it back, and we do not accept withdrawal from the customer after the start of production (sending the confirmation).
The transported width of the L belts may differ from the nominal width. The tolerance is +0.8mm and -0.8mm from 838mm length to 838mm length, +0.8 and -1.3mm from 838.1 length.