20x13 clad classic V-belt
Description
The rubber core of the V-belt is coated with fabric. Characteristically it has a black color. Poor strap did not receive a letter designation in the ISO standard. This strap is a classic clad V-belt with a profile width of 20mm and a profile height of 13mm. The Size fields show the nominal millimeter size of the strap and the calculated inch size. In the Description field, the nominal internal size and the nominal filament size are indicated. This value is the value of the same belt length measured at different locations and is for information/comparison.
The size printed on the product is the internal size (Li). This is true even if the Li marking has not been printed on the size data. If you don't want to change the size from another belt, you don't plan a new drive, pay attention only to the Li size!
Standard pulleys for 20x13 mm profile belts are not available in our webshop. Perhaps the pulley marked SPC (22mm) can be used, or it needs to be turned... But if you buy a twenty belt, hopefully you already have a pulley for it on the machine... From a technical point of view, it has an average range of applications, but it is a reliable and inexpensive solution for belt drives.
TIP! The PIX X'Set V-belts are very affordable and have excellent quality