20B Coil Chains
Description
One roll of chains marked 20B has a length of 5 meters. (For some products, it can be 50m or 100m, this will be marked separately.) Each box contains a roll roller chain and a piece of straight snap link. Roller chains marked 20B can be single-row (simplex, denoted 20B-1), two-row (duplex, marked 20B-2) and three-row (triplex, marked 20B-3). The chains marked 20B have a pitch of 31.75mm, an inner width of 19.56mm, and a roller diameter of 19.05mm. For roller chains marked 20B, snap links and/or sprockets marked 20B must be used.
When riding a chain drive, the tensile strength of the roller chains specified in the catalogue must always be taken into account! A downloadable catalogue can be found under the Downloadable Documents tab.
What you need to know about ISO BS roller chains?
A significant part of the roller chains used in Europe are manufactured according to ISO R606. This standard is originally based on the English standard BS228, which is why ISO chains are often referred to as ISO (BS) roller chains. Based on their structure, roller chains consist of a pin, roller, connecting plate (sponge cake). The material and design of the parts determine the quality of the roller chains. However, the value specified in the standard is usually met by roller chains of any manufacturer. In everyday use, reinforced chains are usually not required. The ISO (BS) standard does not specify a standard for reinforced designs. Reinforced ISO roller chains, which may be commercially available, are manufactured according to the individual ideas of manufacturers. (From reinforced chains, ANSI H standard reinforced versions are also widespread in Europe.)